octagon shed plans free: 182+ Shed With Termite Barrier

www.mysheds.com

Introduction: Building a DIY Shed with Termite Barrier This post will guide you through the process of constructing a small storage shed while incorporating a termite barrier for long-term protection. Termites can cause significant damage to wooden structures, so this preventative measure is crucial for ensuring the longevity of your shed. The design is simple and can be adapted to your specific needs and available space.

Step 1: Planning and Preparation

Determine the size and location of your shed. Consider local building codes and any required permits.

Create a detailed plan with dimensions and materials list. This will help you stay organized and avoid unnecessary trips to the hardware store.

Gather your tools: Saw (circular or hand saw), drill, level, measuring tape, hammer, safety glasses, gloves, and a shovel.

Purchase your materials: Lumber (pressure-treated for ground contact), plywood, roofing materials (shingles, metal roofing), termite barrier (chemical or physical), concrete blocks (for foundation), nails, screws, hinges, and a door.

Step 2: Preparing the Foundation

Clear the area where the shed will be built, removing any vegetation, rocks, and debris.

Level the ground as much as possible.

Place concrete blocks at each corner of the shed foundation and at intervals of 4-6 feet along the sides. These blocks will support the shed's frame.

Ensure the blocks are level using a level and adjusting the soil beneath them as needed.

Step 3: Building the Base Frame

Cut pressure-treated lumber to the dimensions specified in your plan.

Assemble the base frame by connecting the lumber pieces using nails or screws. Ensure the corners are square.

Apply the termite barrier. For a chemical barrier, treat the soil around the perimeter of the foundation blocks according to the manufacturer's instructions. For a physical barrier, install it between the concrete blocks and the wood frame. This typically involves using a termite-resistant membrane or mesh.

Attach the base frame to the concrete blocks using construction adhesive or anchoring screws.

Step 4: Framing the Walls

Cut lumber for the wall studs, top plates, and bottom plates.

Assemble the wall frames on the ground. Space the studs 16 inches apart on center.

Frame the doorway and any windows you plan to include.

Raise the wall frames and attach them to the base frame using nails or screws. Ensure the walls are plumb and level.

Connect the wall frames to each other at the corners.

Install top plates to the top of the wall studs to create a solid connection between the walls.

Step 5: Sheathing the Walls

Cut plywood to fit the exterior walls.

Attach the plywood to the wall frames using nails or screws. Ensure the plywood is flush with the edges of the frame.

Cut out openings for the door and any windows.

Step 6: Building the Roof

Determine the type of roof you want (e.g., gable, shed, or flat).

Cut lumber for the rafters and ridge beam (if applicable).

Assemble the roof frame on the ground (if possible).

Raise the roof frame and attach it to the top of the wall frames using nails or screws.

Sheath the roof with plywood.

Step 7: Roofing and Finishing

Install roofing felt or underlayment over the plywood sheathing.

Install your chosen roofing material (shingles, metal roofing) according to the manufacturer's instructions.

Install the door and any windows.

Apply siding to the exterior walls (optional).

Paint or stain the shed to protect the wood from the elements.

Conclusion: Enjoying Your DIY Shed Congratulations on building your own storage shed with a termite barrier! With proper care and maintenance, your shed will provide years of reliable storage space while being protected from termite damage. Regularly inspect the shed for any signs of termites and address any issues promptly.